Clear records
history record
cancel
Clear records
history record
Products
Y36L Composite die forming hydraulic press
DEVICE DESCRIPTION
This series of hydraulic presses are mainly suitable for the pressing and forming process of plastic (glass fiber reinforced plastic) products such as SMC, BMC, DMC, GMT, LFT-D, etc. There are four-column and frame type fiberglass hydraulic presses for special high-rigidity fuselage structures. It has a quick-down, controllable multi-stage pre-pressing, pressurizing and micro-opening process of the slider. Soft landing process, fast and slow conversion without impact, protects the mold, greatly improves the service life of the mold and equipment, and the preloading process with adjustable speed and slow speed. According to the technical requirements of the product formula, the fluidity can be set by numerical control during pre-compression molding, which is more suitable for the molding of large-area left-right, upper-lower structure complex products. Out-of-mold mold opening and air-jet mold release processes can be set, and the surface quality of hot-pressed mold products is well guaranteed. This process can better solve other technical problems such as mold expansion, product surface roughening, and difficult demolding of products. This series of hydraulic presses is the key equipment for the manufacture of FRP products in aerospace, rail transit, ships, automobiles, construction, petrochemicals, energy, electronics, sports and other industries. Nominal force: 100OKN-3000OKN.
THE MAIN TECHNICAL PARAMETERS
Type | Unit | Y36L-1000T | Y36L-3000T |
Rated pressure | KN | 10000 | 30000 |
The biggest opening | mm | 1800 | 2500 |
Slide block stroke | mm | 1200 | 2000 |
Dinggang itinerary | mm | 300 | 300 |
Preload | KN | 3150 | 10000 |
Mould opening force | KN | 2000 | 6300 |
Ejection force | KN | 1000 | 2000 |
Work table effective size | mm*mm | 3200*2200 | 3600*2500 |
Fast speed | mm/s | 300 | 300 |
Preloading speed | mm/s | 5~25 | 5~25 |
Working speed | mm/s | 1~5 | 1~5 |
Mould opening speed | mm/s | 2~25 | 2~25 |
Return speed | mm/s | 200 | 200 |
Ejection speed | mm/s | 200 | 200 |
Top back speed | mm/s | 120 | 120 |
Motor power | KW | 110.75 | 330.75 |
Working media | YB-N46 Anti-wear hydraulic oil | ||
Press for above-ground height | mm | 8600 | 9500 |
Press depth below ground level | mm | 2200 | 3200 |
Press weight | KG | 170000 | 380000 |
Working medium pressure | Mpa | 25 | 25 |
Y36L Composite die forming hydraulic press
DEVICE DESCRIPTION
This series of hydraulic presses are mainly suitable for the pressing and forming process of plastic (glass fiber reinforced plastic) products such as SMC, BMC, DMC, GMT, LFT-D, etc. There are four-column and frame type fiberglass hydraulic presses for special high-rigidity fuselage structures. It has a quick-down, controllable multi-stage pre-pressing, pressurizing and micro-opening process of the slider. Soft landing process, fast and slow conversion without impact, protects the mold, greatly improves the service life of the mold and equipment, and the preloading process with adjustable speed and slow speed. According to the technical requirements of the product formula, the fluidity can be set by numerical control during pre-compression molding, which is more suitable for the molding of large-area left-right, upper-lower structure complex products. Out-of-mold mold opening and air-jet mold release processes can be set, and the surface quality of hot-pressed mold products is well guaranteed. This process can better solve other technical problems such as mold expansion, product surface roughening, and difficult demolding of products. This series of hydraulic presses is the key equipment for the manufacture of FRP products in aerospace, rail transit, ships, automobiles, construction, petrochemicals, energy, electronics, sports and other industries. Nominal force: 100OKN-3000OKN.
THE MAIN TECHNICAL PARAMETERS
Type | Unit | Y36L-1000T | Y36L-3000T |
Rated pressure | KN | 10000 | 30000 |
The biggest opening | mm | 1800 | 2500 |
Slide block stroke | mm | 1200 | 2000 |
Dinggang itinerary | mm | 300 | 300 |
Preload | KN | 3150 | 10000 |
Mould opening force | KN | 2000 | 6300 |
Ejection force | KN | 1000 | 2000 |
Work table effective size | mm*mm | 3200*2200 | 3600*2500 |
Fast speed | mm/s | 300 | 300 |
Preloading speed | mm/s | 5~25 | 5~25 |
Working speed | mm/s | 1~5 | 1~5 |
Mould opening speed | mm/s | 2~25 | 2~25 |
Return speed | mm/s | 200 | 200 |
Ejection speed | mm/s | 200 | 200 |
Top back speed | mm/s | 120 | 120 |
Motor power | KW | 110.75 | 330.75 |
Working media | YB-N46 Anti-wear hydraulic oil | ||
Press for above-ground height | mm | 8600 | 9500 |
Press depth below ground level | mm | 2200 | 3200 |
Press weight | KG | 170000 | 380000 |
Working medium pressure | Mpa | 25 | 25 |